Lift Features; Technical Specifications; Safety Features - Harmar Mobility Sierra IL500 Owner's Manual And Warranty Information

Lift Features

TECHNICAL SPECIFICATIONS

Weight capacity: 500 lbs.
Stair angles 32 - 45 degrees
Return trips/charge 20 - 60
Speed 14 feet per minute
Power Supply Input: 110 VAC; 50-60 Hz / Output: 33 VDC; 1.2 Amps
Power Source 24 VDC Battery
Drive Rack and Worm Gear
Plastic covers ABS - flame retardant
Safety Features Overspeed Governor
LED Indicator Light, E-stop and
Up/Down Control Switch
ON/OFF Switch

SAFETY FEATURES

• Safety sensors on the top and bottom of the carriage, and underside of the platform halt the
lift immediately if any of these edges touch an obstruction. And the LED indicator light will
turn orange. The lift may only be driven away from the obstruction.
• An interlock on the ramps prevents the lift from being operated unless the ramps are in the
upward position.
4
Rail Extruded aluminum
Upper and Lower Landing Limits
Upper and Lower Final Limit
Ramp Obstruction Sensors
| www.harmar.com | 800-833-0478
Under Platform Safety Pan Obstruction Sensors
Drive Chassis Obstruction Sensors
Non-skid Surface
TEC0030 30NOV15 PN: 630-00002-01 REV B
Call/Send Unit
Manual Hand Crank
Power Supply
(located at one
end of the rail)