Lowering The Lift; Positioning The Mobility Device Onto The Platform - Harmar Mobility AL100-DE Owner's Manual

OUTSIDE VEHICLE LIFT: SECTION 3
OPERATION

LOWERING THE LIFT

1.
Insert the key and turn the switch to the ON
position.
2.
Press DOWN on the toggle switch. The platform
will unfold automatically, as the lift is lowered.
The AL010 & AL050 manually unfolds and
requires assistance as the lift is lowered.
3. Continue to lower the platform until it reaches
the ground and becomes level. See Figure 3-2.
Figure 3-2
NOTICE
DO NOT over-lower the platform to the point where
the vehicle begins to rise. This will damage the lift.
NOTICE
Always walk mobility devices onto the platform
manually.
OUTSIDE VEHICLE LIFT:
8
18MAR2022 | 630-00105 B
Owner's Manual
POSITIONING THE MOBILITY
DEVICE ONTO THE
PLATFORM
1. Slowly walk the mobility device onto the
platform.
2. Maneuver the mobility device until it is
positioned at the center of the platform or the
drive wheels are resting within the wheel
cradles, depending on the lift and chair model.
See Figure 3-3.
Figure 3-3
IMPORTANT: Positioning the mobility device
properly onto the platform is critical to ensuring
the mobility device is properly locked onto the lift.
Always verify that the drive wheels are captured
within the wheel cradles. Please consult your dealer
on the specifics of your application.