Empire Comfort Systems MILLIVOLT STANDING PILOT Series Installation Instructions And Owner's Manual page 75

REMOTE CONTROL OPERATION INSTRUCTIONS
ACCENT LIGHT CONTROL
The light function controls the light by the dimmable light control.
To activate this function, use the Mode Button Figure 71a to
index to the Light icon. See Figures 84 and 85.
The intensity of the output can be adjusted through six levels.
Use the Up/Down Arrow Buttons Figure 71a to adjust the output
level. A single "beep" will confirm reception of the command.
OFF
OFF
39357-0-1018
Figure 84
Figure 85
CONTINUOUS PILOT/INTERMITTENT PILOT (CPI/IPI) SELECTION
With the system in "OFF" position press the MODE key (Figure
70a) to index to the CPI mode icon. See Figures 85 and 86.
Pressing the UP ARROW key will activate the Continuous Pilot
Ignition mode (CPI).
Pressing the DOWN ARROW key will return to IPI.
A single "beep" will confirm the reception of the command.
Figure 86
Figure 87
Page 75