Empire Comfort Systems MILLIVOLT STANDING PILOT Series Installation Instructions And Owner's Manual page 73

REMOTE CONTROL OPERATION INSTRUCTIONS
REMOTE FLAME CONTROL
The Proflame has six flame levels.
With the system ON and the flame level at the maximum in the
appliance, pressing the DOWN ARROW key once will reduce the
flame height by one step until the flame is turned OFF.
The UP ARROW key will increase the flame height each time it is
pressed.
If the UP ARROW key is pressed while the system is ON but the
flame is OFF, the flame will come ON in the high position.
Figure 75 - Flame OFF
Figure 76 - Flame Level 1
Figure 77 - Flame Level 5
39357-0-1018
Figure 78 - Flame Level Maximum
THERMOSTAT TRANSMITTER OPERATION
The Remote Control can operate as a room thermostat. The ther-
mostat can be set to a desired temperature to control the comfort
level in a room.
To activate the function, press the THERMOSTAT key. See Fig-
ure 71a. The LCD display on the Transmitter will change to show
that the room thermostat is "ON" and the set temperature is now
displayed. See Figure 79.
To adjust the set temperature, press the UP or DOWN ARROW
keys until the desired set temperature is displayed on the LCD
screen of the Transmitter.
Figure 79
Page 73