Empire Comfort Systems MILLIVOLT STANDING PILOT Series Installation Instructions And Owner's Manual page 44

Before you begin: If you are installing logs into the DVx36 or
DVX42 model then this fireplace is supplied with a set of 13
ceramic fiber logs. Do not handle these logs with your bare
hands. Always wear gloves to prevent skin irritation from
ceramic fibers. After handling logs, wash your hands gently
with soap and water to remove any traces of fiber.
The positioning of logs is critical to safe and clean operation
of this fireplace. Sooting and other problems may result if the
logs are not properly and firmly positioned in the fireplace.
Please refer to Figures 65 through 67 and corresponding
WARNING, when completing the following log placement
steps.
Page 44
LOG PLACEMENT
1. Remove top and bottom louvers.
2. Remove glass door from firebox.
3. Remove logs from bun.
4. Place Log A onto the rear part of the burner over the
pilot.
39357-0-1018