Ingeteam INGECON SUN EMS Board Installation And Configuration Manual page 45

Ingeteam
Adding ISS 1Play
1. Control bar > Add device
2. From the pop-up window in Device Type select the type: PV/Battery Inverter.
·
·
·
·
3. Click on Find . If the unit is correctly connected and configured a warning is displayed
with the device's serial number and firmware.
4. Finally, save the settings by clicking on Save .
Adding External Wattmeter
1. Control bar > Add device
2. From the pop-up window in Device Type select the type: Power Meter.
·
·
·
3. Click on Find . If the wattmeter is correctly connected and configured a warning is
displayed with the serial number and firmware of the device.
4. Finally, save the settings by clicking on Save .
Adding the Grid
AAX2026IQM25_B.docx
Installation and configuration of a photovoltaic self consumption system with batteries
Select the connection type: RS485.
Modbus node: 02
Alias: ISS 1Play
Phase: R
Select the connection type: RS485.
Modbus node: 01
Alias: Wattmeter
45