Associated Communications Network Design - Ingeteam INGECON SUN EMS Board Installation And Configuration Manual

Installation and configuration of a photovoltaic self consumption system with batteries

3.2 Associated communications network design

Once we have the electrical diagram of the desired installation, the associated communications
network is designed. This communications network is either via Wi-Fi or via Ethernet.
Two examples of the installation are shown below: one is designed with Wi-Fi communication
and the other uses Ethernet communication.
Wi-Fi Communication
Photovoltaic inverter
Ethernet Communication
32
Wattmete
r
Device
EMS Board
Wattmeter
ISS 1Play
Wattmete
r
IP Settings:
Communication
IP: 192.168.1.11
RS-485
RS-485 (internal)
IP: 192.168.1.12
IP Settings:
Ingeteam
Modbus node
-
01
02
03
AAX2026IQM25_B.docx