System Device Configuration; Ingecon Sun Storage 1Play - Ingeteam INGECON SUN EMS Board Installation And Configuration Manual

Of a photovoltaic self consumption system with batteries
Hide thumbs Also See for INGECON SUN EMS Board:
Table of Contents

Advertisement

Available languages

Available languages

Installation and configuration of a photovoltaic self consumption system with batteries

3.5 System device configuration

This section provides a description of the steps required to configure all the devices existing in
the photovoltaic self consumption installation with batteries.

3.5.1 INGECON SUN STORAGE 1Play

For further information on the configuration of the INGECON SUN STORAGE 1Play,
please see the "Installation and Operation Manual", available on the Ingeteam
website.
The configurations must be carried out by the unit installer and never by the user.
The installer must have sufficient knowledge to be able carry out the installation
correctly.
Ingeteam accepts no liability for incorrect use of the installer password nor the
consequences that may arise from incorrect configuration of the unit by the user
and / or the installer.
The menu CONFIGURATION is password restricted. Access to this menu is only
allowed to installers (qualified personnel). The installer password is 0332 and must
first be entered into the CONFIGURATION > ENTER PASSWORD sub menu.
When the password has been entered correctly, an asterisk will appear at the top of
the CONFIGURATION menu.
The procedure for configuring the ISS 1Play is described below. For this, the ISS 1Play must be
switched on from the battery or from the photovoltaic panels.
1. Battery Type
The battery type selection in the configuration process must be done with caution.
The battery manufacturer does not offer any warranty if the battery type is
configured incorrectly in the inverter.
For example, if a lead-acid battery is selected in the inverter when the battery is
actually Li-Ion, it may be damaged.
This section is for selecting the battery type to be used in the installation. Enter via the Display:
Select the option corresponding to the battery type installed and confirm by clicking "OK". Save
the changes.
Li-ion batteries
For more information about the compatible lithium batteries, see the "List of lithium
batteries approved for the INGECON SUN STORAGE 1Play" available on the
Ingeteam website.
36
Menu > Configuration > Battery > Battery Type
Ingeteam
AAX2026IQM25_B.docx

Advertisement

Chapters

Table of Contents
loading

Table of Contents