Measurement Of Resistance (Continuity Check) - KYORITSU KEW 3021A Instruction Manual

Find Quality Products Online at:
KEW3021A
KEW3022A
KEW3023A

6-5 Measurement of resistance (Continuity check)

#
DANGER

Do not apply voltage to the resistance range. Always test the circuit
o r e q u i p m e n t t o e n s u r e i t i s s u r e l y d e - e n e r g i z e d b e f o r e
measurement.
Zero Ω ADJ. function
This is a function to null the resistance of the test lead or fuse in order
to display the resistance of the equipment under test only.
Setting:
(1) Set the Range selector switch to theΩ(Continuity) position.
(2) Short the test leads: LINE (red) and EARTH (black).
(3) Press the Zero Ω ADJ. key with the Test button locked or with the
Remote control switch pressed. Then
value of 0.00 Ω is displayed on the LCD. This value is saved in
the memory of the instrument and won't be cleared after turning
off the instrument.
— 15 —
GlobalTestSupply
www.
Fig. 9
mark is lit up and a
.com
sales@GlobalTestSupply.com