Table of Contents
Advertisement
im Vertrieb von
Remote Control, cont'd
Command/response table for special function SIS commands (cont'd)
Command
Window anti-aliasing filter
Set anti-aliasing filter
Example:
View anti-aliasing mode
Baud rate
Change baud rate
Control Software for Windows
The Windows-based Extron PIP 422 & 444 Control Program, which communicates
with the processor via the RS-232/RS-422 port, provides an easy way to configure
and operate the PIP. The program is compatible with Windows 2000 and
Windows XP.
Installing the software
The program is contained on the Extron Software Products CD-ROM, disk B.
Install the software as follows:
1.
Figure 4-2 — Software CD window
www.camboard.de
4-10
PIP 422 and PIP 444 Picture-in-Picture Processors • Remote Control
CAMBOARD Electronics
ASCII Command
Response
(host to PIP)
(PIP to host)
*
*7#
Aaf
X1
X27
3*4*7#
Aaf3*4
*7#
X1
X27
CP
Ccp
Esc X28
For full functionality, install both of the following programs:
•
The PIP 422 & 444 Control Program
•
The Firmware Loader
Insert the CD-ROM into the drive. The installation program should start
automatically. If it does not self-start, run Launch.exe from the CD.
The Extron software CD window appears (figure 4-2).
Tel. 07131 911201
Fax 07131 911203
Additional description
*
Set anti-aliasing filter for
X1
X27
window
X1
Set anti-aliasing filter for
window 3 to auto-adjust.
View anti-aliasing filter for
window
X1
Change the baud rate to
X28
®
ce-info@camboard.de
to mode
.
X27
.
.
X28
Advertisement
Table of Contents
