Extron electronics PIP 422 User Manual page 42

im Vertrieb von
Remote Control, cont'd
Command/response table for SIS commands (cont'd)
Command
Horizontal shift
For the image shift command, a negative (–) value is a left shift and a positive value (+) is a right
shift. To enter a negative value for the image positioning, enter a minus sign before the
Entry of a positive sign is optional, but not required; if no sign is included in the SIS command, the
PIP assumes a positive value. The PIP returns a negative sign in its response when the value is
negative, but does not return a positive sign.
Specific window shift value
Example:
Example:
Increment shift up
Decrement shift down
View shift value
Vertical shift
For the image shift command, a negative (–) value is an up shift and a positive value (+) is a down
shift. To enter a negative value for the image positioning, enter a minus sign before the
Entry of a positive sign is optional, but not required; if no sign is included in the SIS command, the
PIP assumes a positive value. The PIP returns a negative sign in its response when the value is
negative, but does not return a positive sign.
Specific shift value
Example:
Example:
Increment shift down
Increment shift up
View shift value
Horizontal size
For the image size command, a negative (–) value shrinks the image and a positive value (+)
enlarges the image. To enter a negative value for the image size, enter a minus sign before the
value. Entry of a positive sign is optional, but not required; if no sign is included in the SIS
command, the PIP assumes a positive value. The PIP returns a negative sign in its response when
the value is negative, but does not return a positive sign.
Specific size value
Increment size up
Increment size down
View size value
www.camboard.de
4-6 PIP 422 and PIP 444 Picture-in-Picture Processors • Remote Control
CAMBOARD Electronics
ASCII Command Response
(host to PIP) (PIP to host)
* * H Hph1*
X8 X1 X9
1*1*323H Hph1*1*323
2*3*231H Hph2*3*231
* +H Hph1*
X8 X1
* –H Hph1*
X8 X1
* H
X8 X1
* * / Vph
X8 X1 X10 X8
1*2*323/ Vph1*2*323
2*4*–231/ Vph2*4*–231
* +/ Vph
X8 X1 X8
* –/ Vph
X8 X1 X8
* /
X8 X1
* * : Hsz
X8 X1 X11 X8
* +: Hsz
X8 X1 X8
* –: Hsz
X8 X1 X8
* :
X8 X1
Tel. 07131 911201
Fax 07131 911203
Additional description
* Set the window's horizontal
X9
X1
positioning value to
Set window 1's horizontal
positioning value to 323.
Set the image in window 3's
horizontal positioning value to
+231.
* Shift the window to the right.
X1 X9
* Shift the window to the left.
X1 X9
Show the window's horizontal
X9
positioning value.
* * Set the vertical centering value
X10
X1
to .
X10
Set window 2's vertical
positioning value to 323.
Set the image in window 4's
vertical positioning value to –231.
* * Shift down.
X1 X10
* * Shift up.
X10
X1
Show the vertical centering
X10
value.
* * Set horizontal sizing to
X1 X11
* * Make window or image wider.
X11
X1
* * Make window or image
X1 X11
narrower.
Show horizontal sizing value.
X11
ce-info@camboard.de
value.
X9
.
X9
value.
X10
X11
.
X11