Extron electronics PIP 422 User Manual page 30

im Vertrieb von
Operation, cont'd
4.
5.
6.
www.camboard.de
3-12 PIP 422 and PIP 444 Picture-in-Picture Processors • Operation
CAMBOARD Electronics
Rotate the Adjust knob or Adjust
following adjustment ranges:
The Adjust knobs have no mechanical limits to their rotation.
• Color/Tint: The range for both adjustments is 0 to 127.
• Brightness/Contrast: The range for brightness is 50 to 127. The range for
contrast is 38 to 107.
• Filter: Push the Detail button to toggle between the detail filter
adjustment and the anti-aliasing adjustment.
Detail: Either knob sets the detail filter within a range from 0 (the softest
detail) to 15 (the crispest detail). The default is 8 (no filtering).
The Detail filter is only available for inputs that are configured as S-video or
composite video.
Anti-aliasing: Either knob sets the anti-aliasing filter within a range
from off (default), mode 0 to 3, or auto. In auto, the PIP selects the auto-
aliasing setting by the size of the window.
• Position: Push the Position button to toggle between the position
adjustment for the selected window (indicated by the lit Window Select
LED) and for the image within the selected window.
Window Position: Observe the display and turn the Adjust
move the selected window side to side. Turn the Adjust
the selected window up and down.
Image Position: Observe the display and turn the Adjust
move the image side to side in the selected window. Turn the Adjust
knob to move the image up and down in the selected window.
• Size: Push the Size button to toggle between the size adjustment for the
selected window and for the image within the window.
Window Size: Observe the display and turn the Adjust
stretch or shrink the selected window from side to side. Turn the
Adjust knob to stretch or shrink the selected window up and down.
Image Size: Observe the display and turn the Adjust
or shrink left and right the image within the selected window. Turn the
Adjust knob to stretch or shrink in the selected window up or down.
• Zoom: Push the Zoom button to toggle between the zoom adjustment
for the selected window and for the image within the window.
Window Zoom: Observe the display and turn either Adjust knob to
zoom in on or zoom out from the selected window.
Image Zoom: Observe the display and turn either Adjust knob to zoom
in on or zoom out from the image in the selected window.
Repeat steps 2 and 4 for each image adjustment to be made for the selected
window.
Repeat steps 1, 2, 4, and 5 for each window.
To exit to the default cycle, do nothing for approximately 20 seconds; the PIP
times out and return to the default display cycle.
Tel. 07131 911201
Fax 07131 911203
knob to vary the settings within the
knob to move
knob to
knob to
knob to stretch
ce-info@camboard.de
knob to