Features & Operating Controls - Wells HMP6 Owner's Manual

FEATURES & OPERATING CONTROLS
INDICATOR
LIGHT
TEMPERATURE
CONTROL
KNOB
A. THERMOSTAT
1. On THERMOSTATICALLY CONTROLLED warmers, power is
applied to the heating element according to the control knob
position and the actual temperature at the temperature sensing
thermobulb.
2. The desired temperature is controlled by rotating the
TEMPERATURE CONTROL KNOB. The knob has a numeric
scale, where higher numbers correspond to higher temperature.
3. On warmers equipped with an INDICATOR LIGHT, the light will
glow when the thermostat is calling for heat (i.e. the element is
IL2468
energized).
4. The TEMPERATURE CONTROL KNOB will rotate
approximately 300º, and will reach a "stop" at both ends.
The OFF position is marked.
NOTE: The dial position is an indication of the temperature
setting. Actual temperature will vary depending upon the type of
product and food consistency.
B. MOUNTING
HMP6 Series warmers require a cutout and mounting holes in the
counter top.See the Installation Instructions, supplied with the
particular warmer, for details.
2