Features & Operating Controls - Wells SS4 Series Owner's Manual

FEATURES & OPERATING CONTROLS
INDICATOR
LIGHT
TEMPERATURE
CONTROL
KNOB
WELLSLOKS
WATER LEVEL
A. THERMOSTAT
1. On THERMOSTATICALLY CONTROLLED warmers, power is applied
to the heating element according to the control knob position and the
actual temperature at the temperature sensing thermobulb.
2. The desired temperature is controlled by rotating the TEMPERATURE
CONTROL KNOB. The knob has a numeric scale, where higher
numbers correspond to higher temperature.
3. On warmers equipped with an INDICATOR LIGHT, the light will glow
when the thermostat is calling for heat
(i.e. the element is energized).
IL2468
4. The TEMPERATURE CONTROL KNOB will rotate approximately 300º,
and will reach a "stop" at both ends. The OFF position is marked.
NOTE: The dial position is an indication of the temperature
setting. Actual temperature will vary depending upon the type of
product and food consistency.
B. MOUNTING
1. Top-mounted built-in warmers are be equipped with WELLSLOKS,
uniquely designed turnout tabs which help secure the warmer top
flange to the countertop.
2. See the Installation Instructions, supplied with the particular appliance,
for details.
C. DRAINS
IL2469
1. Models with a "D" (e.g. SS10TD) have drains for each well, with
each well having an individual drain valve.
2. Models that have the individual drain lines manifolded together
(custom installation), with a single drain valve for the entire
manifold.
D. AUTOFILL
SENSOR
1. On AUTOFILL units, water level is automatically fed into the
"master" pan whenever that pan's thermostat is ON.
2. Water level is sensed by a WATER LEVEL PROBE.
IL2694
IL2694
4