Download Print this page

Wells HMP6D Owner's Manual

Built-in rectangular warmers with thermostat control
Hide thumbs Also See for HMP6D:

Advertisement

Quick Links

011A
WELLS BLOOMFIELD, LLC
10 Sunnen Dr., St. Louis, MO 63143
telephone: 314-678-6314
fax: 314-781-2714
www.wellsbloomfield.com
OWNERS MANUAL
BUILT-IN
RECTANGULAR
WARMERS
with
THERMOSTAT
CONTROL
MODELS
HMP6
HMP6D
HMP6ULD
Includes
MODEL: HMP6D
INSTALLATION
USE & CARE
EXPLODED VIEW
PARTS LIST
WIRING DIAGRAM
IMPORTANT: DO NOT DISCARD THIS MANUAL
This manual is considered to be part of the appliance and is to be given to the OWNER or
MANAGER of the restaurant, or to the person responsible for TRAINING OPERATORS of
this appliance. Additional manuals are available from your WELLS DEALER.
THIS MANUAL MUST BE READ AND UNDERSTOOD BY ALL PERSONS USING OR
INSTALLING THIS APPLIANCE. Contact your WELLS DEALER if you have any
questions concerning installation, operation or maintenance of this equipment.
308012
12
p/n 2M-
Rev. (-)
M011A.01
0214

Advertisement

loading

Summary of Contents for Wells HMP6D

  • Page 1 Additional manuals are available from your WELLS DEALER. THIS MANUAL MUST BE READ AND UNDERSTOOD BY ALL PERSONS USING OR INSTALLING THIS APPLIANCE. Contact your WELLS DEALER if you have any questions concerning installation, operation or maintenance of this equipment.
  • Page 2 LIMITED WARRANTY STATEMENT Unless otherwise specified, all commercial cooking Unless otherwise specified, all commercial cooking The prices charged by Wells Bloomfield for its products The prices charged by Wells Bloomfield for its products equipment manufactured by WELLS BLOOMFIELD, LLC is are based upon the limitations in this warranty.
  • Page 3 PARTS & SERVICE CUSTOMER SERVICE DATA INTRODUCTION Thank You for purchasing this Wells Bloomfield appliance. Thank You for purchasing this Wells Bloomfield appliance. Proper installation, professional operation and consistent maintenance of this appliance will ensure that it gives you the very best performance and a long, economical service life.
  • Page 4 FEATURES & OPERATING CONTROLS THERMOSTAT 1. On THERMOSTATICALLY CONTROLLED warmers, power is applied to the heating element according to the control knob position and the actual temperature at the temperature sensing INDICATOR thermobulb. LIGHT 2. The desired temperature is controlled by rotating the TEMPERATURE CONTROL KNOB.
  • Page 5 Do not operate this appliance if the control panel is damaged. Call installation instructions are your Authorized Wells Service Agent for service. read and followed. Damage to the appliance may result The technical content of this manual, including any wiring diagrams,...
  • Page 6 INSTALLATION NOTE: DO NOT discard NOTE: DO NOT discard UNPACKING & INSPECTION UNPACKING & INSPECTION the carton or other packing Carefully remove the appliance from the carton. Remove all protective materials until you have plastic film, packing materials and accessories from the Appliance inspected the appliance for before connecting electrical power or otherwise performing any hidden damage and tested it...
  • Page 7 INSTALLATION Top-Mounted Warmers NOTE: Damage caused by leaks due to improper Verify that provided sealants are applied to the underside of the installation is NOT covered by warmer top flange prior to setting the unit into the cutout. warranty. After installation, verify that all supplied fasteners and other mounting hardware is properly installed and tightened.
  • Page 8 CAUTION: SHOCK HAZARD Wells Manufacturing recommends operating WET for consistent food heating. DO NOT splash or pour water If your wet-operation warmer is allowed to run dry, turn it OFF and onto control panel or wiring.
  • Page 9 Never use metal implements, wire brushes, abrasive scratch pads or steel wool to clean stainless steel. Warmer pans, insets and other vessels are subject to a harsher environment. Wells Manufacturing uses an very high quality stainless steel (#304DDQ) for our food warmer pans.
  • Page 10 fire and/or electric shock hazard. Contact your Authorized Wells Service Agency to inspect warmer if water or grease contamination is suspected. Close drain valve. Add proper amount of warm water. Turn control...
  • Page 11 CLEANING INSTRUCTIONS WEEKLY CLEANING INSTRUCTIONS CAUTION: CHEMICAL BURN PREPARATIONS: Remove any insets, pans and/or adapter tops. HAZARD Drain or remove water from well if used for wet operation. Deilimng chemicals may be caustic. Wear appropriate FREQUENCY: Weekly, or whenever lime or scale is seen personal protective equipment.
  • Page 12 Drain-equipped unit will not hold water Contact your Authorized Wells Service Drain valve damaged or pan(s) leaking Agency for repairs There are no user-serviceable components in this appliance. In all instances of damage or malfunction, contact your Authorized Wells Service Agency for repairs.
  • Page 13 EXPLODED VIEW & PARTS LIST MODEL HMP-6 PAN ASSEMBL Y P2-305802 ELEMENT PAN ELEMENT CLIP WS-505643 2C-30397 HEATING ELEMENT 2N-45431UL STRAIGHT CONDUIT FITTING 2K-37748X PILOT LIGHT RETAINER CLIP K-TYPE THERMOSTAT CONTROL 2C-63271 2T-38968 RED LIGHT SIGNAL THERMOBULB 2J -35687 BRACKET D8-303352 RIVET 2C-34284...
  • Page 14 EXPLODED VIEW & PARTS LIST MODEL HMP-6D DRAIN SCREEN ASSEMBL Y P2-31869 PAN ASSEMBL Y P2-41463 PILOT LIGHT K-TYPE RETAINER CLIP THERMOSTAT 2C-43271 2T-38968 RED LIGHT SIGNAL 2J -35687 POP RIVET 2C-34284 HEATING CONTROL KNOB ELEMENT ASSEMBL Y 2N-45431UL ELEMENT 2R-40498 CLIP 2C-30397...
  • Page 15 EXPLODED VIEW & PARTS LIST MODEL HMP-6ULD DRAIN SCREEN ASSEMBL Y Wireset for HMP6DU6 P2-31869 use P2-41317A PAN ASSEMBL Y P2-41463 K-TYPE THERMOSTAT 2T-38968 CONTROL BOX ( 6’ use 2T-46551) P2-306959 PLATE, THERMO P2-45614 RED LIGHT SIGNAL CONTROL 2J -35687 PANEL I7-Z12221 ELEMENT CLIP...
  • Page 16 M011A.01 2M-308012 Owners Manual for Built-In Rectangular T’Stat Warmers...
  • Page 17 M011A.01 2M-308012 Owners Manual for Built-In Rectangular T’Stat Warmers...
  • Page 18 M011A.01 2M-308012 Owners Manual for Built-In Rectangular T’Stat Warmers...
  • Page 19 “D” models only, excluding “DM” models 5P-20385 contact your Wells authorized service agency, or call: DRAIN SCREEN P2-31869 Wells Bloomfield, LLC OPTIONAL 72” WIRING, thermostatically controlled warmers 10 Sunnen Dr.
  • Page 20 WELLS BLOOMFIELD, LLC 10 Sunnen Dr., St. Louis, MO 63143 telephone: 314-678-6314 fax: 314-781-2714 www.wellsbloomfield.com...

This manual is also suitable for:

Hmp6Hmp6uldHmp6ulHmp6du