nifty TrackDrive TD120T Series Operating/Safety Instructions Manual page 50

TrackDrive (TD) Series
Operating & Safety Instructions
6. Operating limits (including environmental conditions);
All components within the tilt interlock are rated to the environmental conditions acceptable for the
machine; see Section 2.2.
7. Indications and alarms;
There are no indicators or alarms to show that the Niftylift levelling system is or is not functioning.
8. Muting and suspension of safety functions;
It is not possible to suspend the operation of the Elevated levelling system
9. Control modes;
The levelling system has two modes of operation
1. Normal movements of the luffing booms cause the system to constantly adjust the cage angle to
keep it level.
2. Manual adjustment to account for drift of the system over time.
10. Maintenance; Maintenance check lists;
Normal maintenance
 Removal of air from the hydraulic system if the product is left unused for long periods of time.
11. Ease of accessibility and replacing of internal parts;
Replacement of parts should only be carried out by appropriately trained and competent persons.
If parts require replacement only replace the whole components such as hoses, hydraulic cylinders or
load holding and over centre valve.
Do not attempt maintenance of hydraulic components i.e. replace seals or internal component.
Only Niftylift original and supplied parts shall be used.
12. Means for easy and safe trouble shooting;
Elevate the luffing booms and check that the cage remains level. If the cage does not remain level the
system should be serviced by trained persons fully conversant with the system functionality.
13. Information explaining the applications for use relevant to the category to which reference is
made;
Not applicable
14. Checking test intervals where relevant.
Check the operation of the elevated drive system at the beginning of every duty cycle.
48
English/USA – 02/17