Scope; Introducing The Track Drive 120T (Td) Series - nifty TrackDrive TD120T Series Operating/Safety Instructions Manual

1.2

SCOPE

These operating instructions contain all the necessary information required to allow the safe operation
of any Niftylift TD120T (TD34T), mains electric (AC), diesel (D), petrol/gasoline (P) engine, or a
combination of these.
For further technical information, circuit diagrams and specific instructions for all maintenance which
may need to be carried out by specialist trained personnel, see the associated Workshop and Parts
manual for your model of Niftylift TD120T (TD34T).
1.3 INTRODUCING THE TD120T TRACK DRIVEN (TD) SERIES
Please note at the time of going to press all information, illustrations, details and descriptions contained
herein are valid. Niftylift reserves the right to change, modify or improve its products without any
obligations to install them on previously manufactured machines.
If you require further information after reading this manual, please do not hesitate to contact us.
Niftylift Ltd, Chalkdell Drive, Shenley Wood, Milton Keynes MK5 6GF, UK
Tel: +44 (0) 1908 223456
Niftylift Inc, 1525 S. Buncombe Road, Greer, SC 29651 USA
Tel: +01 864 968 8881
Nifty Pty Ltd, 11 Kennington Drive, Tomago, NSW 2322, Australia
Tel: +61 (0) 2 4964 9765
The Niftylift TD120T (Track Drive) is an extremely versatile articulated boom platform of unique and
simple design. It is capable of placing two men and their tools up to a height of 12.20m (40ft) or an
outreach of 6.10m (20ft 1in).
The booms are mounted via a 406
rubber tracks. The fourth boom is telescopic, and when combined with the use of the articulating
booms gives an outstanding working envelope. The powered tracks enable the machine to reach areas
previously thought unattainable.
The four outriggers make a simple and swift set up possible. A unique pressure sensitive micro switch
system fitted to each outrigger prevents operation of the machine until all outriggers have been
correctly deployed and also provides a loud audible alarm warning of a possibly hazardous situation.
Standard build is four fully hydraulically operated outrigger legs, with integral load holding valves
mounted on each outrigger cylinder.
A simple, all-hydraulic proportional control system gives smooth, reliable movement of the platform
and maximum reliability in the harshest environments.
Models include the following:
DAC: - DIESEL & AC ELECTRIC
D: - DIESEL ONLY
P: - PETROL ONLY
English/USA – 02/17
Operating & Safety Instructions
Fax: +44 (0) 1908 312733
Fax: +01 864 968 8836
Fax: +61 (0) 2 4964 9714
o
powered swing mechanism on to a compact base mounted on
PAC: - PETROL & AC ELECTRIC
PG: - PETROL & LPG (PROPANE)
TrackDrive (TD) Series
3