nifty TrackDrive TD120T Series Operating/Safety Instructions Manual page 33

4.4.2 BOOM FUNCTIONS
1) Push and hold green "Power Control" button (if fitted) or depress footswitch
2) Select lever 1, 2, 3, 4 or 5 for desired function
HYDRAULIC DUTY SELECTOR
Located on the right hand side of the Platform Control Levers, it is a three position, stay-put selector
switch. Left (anti-clockwise) for Booms, Centre for Drive and Right (clockwise) for Outriggers.
English/USA – 02/17
1 2
1 Operates Platform Lev.
2 Operates Telescope
3 Operates Lower Boom
4 Operates Upper Boom
5 Operates Swing
IF ALARM SOUNDS, DESCEND IMMEDIATELY AND RE-LEVEL THE MACHINE
BASE USING THE FOUR OUTRIGGER CONTROL LEVERS
Operating & Safety Instructions
3 4
FWD for forward
UP for out
UP for up
UP for up
UP for right
TrackDrive (TD) Series
5
BACK for back
DOWN for in.
DOWN for down
DOWN for down
DOWN for left
31