Package contents
The following describes the components that are provided with each switch. If any components are
missing, contact the switch vendor.
1. Avaya Virtual Services Platform 7200 (either a VSP 7254XSQ or VSP 7254XTQ
2. Rack-mounting hardware that includes:
• Rack-mount brackets
• Screws to attach brackets to the switch
• Screws to secure the switch to the equipment rack
3. The VSP 7200 supports two field-replaceable power supplies (either front-to-back or back-to-
front). One power supply ships with the unit.
4. Power cord
• The VSP 7200 "A" models (EC7200A1B-E, EC7200A1F-E6, EC7200A2B-E6, and
EC7200A2F-E6) do not include a power cord for the AC power supply. All other models
include a country-specific power cord.
• The VSP 7200 DC models (EC720001F-E6 and EC720002F-E6) ships with a DC power
supply wiring assembly for the DC power supply.
5. Three field-replaceable fan modules (either front-to-back or back-to-front)
6. Documentation
Note:
A 300mm-900mm slide rack mounting kit is available as an option.
Installing a power supply
The VSP 7254XSQ and the VSP 7254XTQ ship with a power supply, but it is not installed in the
chassis. Refer to the following procedures to install either an AC or a DC power supply.
There are two power supply slots (PSU1 on the left side and PSU2 on the right).
• If you only have one power supply, you can install it in either PSU1 or PSU2.
November 2016
• An adequate power source is within 6 feet (1.83 meters) of the switch.
One 15-amp circuit is required for each power supply.
• At least 2 inches (5.08 centimeters) of clearance on the front and back
of the switch for ventilation.
• Cables should be dressed to prevent blocking air flow.
Installing the Avaya VSP 7200 Series
Comments on this document? infodev@avaya.com
Package contents
21