Yamaha CL3 Service Manual page 4

CL3/CL1
SPECIFICATIONS（総合仕様）
General specifications
Sampling Frequency
Signal Delay
Fader
Frequency Response
Total Harmonic Distortion
*5
Hum&Noise
Dynamic Range
Crosstalk@1kHz
Dimensions (W x H x D)
and Net Weight
Power Requirements
(wattage)
Power Requirements
(voltage and hertz)
Temperature Range
Included Accessories
Optional Accessories
*1. Crosstalk is measured with a 30dB/octave filter @22kHz
*2. Excluded MBCL optional meter bridge.
*3. Refer to the Yamaha pro audio website for information on supported cards.
http://www.yamahaproaudio.com
*4. Total Harmonic Distortion is measured with 18dB/o ctave filter @80kHz
*5. Hum & Noise are measured with A-Weight filter.
4
（一般仕様）
Internal
External
Less than 2.5ms, OMNI IN to OMNI OUT, Fs= 48kHz
100mm motorized, Resolution=1024steps, +10dB to –138dB, –∞dB all faders
+0.5, –1.5dB 20Hz-20kHz, refer to +4dBu output @1kHz, OMNI IN to OMNI OUT
*4
Less than 0.05% 20Hz-20kHz@+4dBu into 600Ω, OMNI IN to OMNI OUT, Input Gain= Min.
–128dBu typ., Equivalent Input Noise, Input Gain= Max.,
–88dBu, Residual output noise, ST master off
112dB typ., DA Converter,
108dB typ., OMNI IN to OMNI OUT, Input Gain= Min.
*1
–100dB , adjacent OMNI IN/OMNI OUT channels, Input Gain= Min.
CL3: 839mm x 299mm
CL1: 648mm x 299mm
CL3/CL1: 170W, Internal Power Supply
CL3/CL1: 200W, Simultaneous use of Internal PSU and External PW800W
US/Canada: 120V 60Hz
Japan: 100V 50/60Hz
China: 110-240V 50/60Hz
Korea: 220V 60Hz
Other: 110-240V 50/60Hz
Operating temperature range: 0-40°C
Storage temperature range: –20-60°C
Owner's Manual, Dust Cover, Power Cord
Meter Bridge MBCL, Mini-YGDAI cards
Power Supply PW800W, Power Supply Link Cable PSL360
44.1kHz
48kHz
44.1kHz
+4.1667%, +0.1%, –0.1%, –4.0%
48kHz
+4.1667%, +0.1%, –0.1%, –4.0%
*2 x 667mm, 29kg *2
*2 *2
x 667mm, 24kg
*3
, Gooseneck Lamp LA1L
±200ppm
±200ppm