Yamaha CL3 Service Manual page 132

CL3/CL1
■ SERVICE CHECK PROGRAM
● CL3/CL1 Test Program
a. Use this Test Program to execute the service check for CL3/CL1.
Load the latest program shown in the following table into CL3/CL1 itself and PC before executing the service check.
For the updating procedure, refer to the "UPDATING FIRMWARE" section on page 164.
* The test program can be downloaded from the YSISS Home Page.
• CL_Updata
Generic term
MAIN FIRMWARE
PC application for Service Check
DME-N Network Driver
b. Use this test program with the OS: Windows 2000/XP/7.
Use the PC application for service check.
Immediately after start-up, the screen as sown in Fig. 1 appears.
Start-up screen (Fig. 1)
Clicking this button makes check
screen (Fig. 2) displayed.
132
FILE name ("?" depends on version)
MCLP?_??.PGM
¥TestProgram¥Service Test PC App
¥CLTest_service.exe
¥TestProgram
¥DME-N Network Driver v1.2.2¥Setup.exe
Click here to close the screen (to enter the tool bar)
Used to select communication
port (Ethernet MIDI)
Version Writing procedure [object]
CPU circuit board check/General
V1.xx
check [USB storage]
V1.0.0
V1.2.2
Click here to end the program.
Click here to end this program (same as
the "X" button at the upper right of the screen)
[PC for checking]
[PC for checking]