About This Document - Siemens FDM221 Technical Manual

1

About this document

Group of persons
Product Manager (PM)
Project Manager
Project Engineer
Installation personnel
Maintenance Personnel
Fire Safety & Security Products
Purpose of the document
This document contains all information on the manual call points FDM221,
FDM223 and FDM224.
The consistent observance of the instructions ensures a trouble-free and safe
application.
Target group
This documentation and the instructions contained therein are intended for the
following groups of persons, who perform tasks and have the necessary
qualification:
Activity
He is in charge of local product management and
is responsible for the interchange of information
between the plant supplying the equipment and
his DU for his product line. He co-ordinates the
flow of information between the individual groups
of people for the various projects.
The project manager is responsible for the local
project management. He co-ordinates the
schedules of all groups of people working on a
project as well as resources. He also continuously
obtains the technical information required for
project realization.
Provides the parameterization of products,
devices and systems in the DU for a specific
country or customer. He monitors the
serviceability of and gives the go-ahead for the
commissioning of products, devices and systems
at the place of installation. They are also
responsible for trouble-shooting.
They install product, device or system
components on site, and subsequently carry out a
general performance check.
They carry out all the maintenance work indicated
in the product documentation and check
equipment for total serviceability.
Reference documents
Number Name
007904 Installation for FDM221, always enclosed with the detector
Installation for FDM223 and 224, always enclosed with the detector
007905
Operational and safety regulations
Before groups of persons begin work on the system they must have read and understood the related
documents, in particular Chapter "Safety regulations".2
0BAbout this document
Qualification
He has had training appropriate to his function
and product range and has attended the product
manager training course.
He has had the technical training appropriate to
his function and the size of a project or the
product line used in the project and has attended
the training courses for project managers at the
supplier's works.
He has had the training appropriate to his function
and to the products, devices and systems to be
parameterized and has attended the technical
training courses for project engineers at the
supply plant.
Professional training in the field of building
automation or electrical installations.
They have had the technical training appropriate
to their function and the product.
5
007002_e_en_--.doc
11.2007