Safety-Relevant Working Instructions - Siemens FDM221 Technical Manual

1BSafety notes
2.2

Safety-relevant working instructions

8
Fire Safety & Security Products
Country-specific standards
The products are developed and produced in compliance with the relevant
international and European safety standards. Should additional country-specific,
local safety standards or regulations concerning project planning, installation,
operation and disposal of the product apply in the place of operation, then these
standards or regulations must also be taken into account in addition to the safety
regulations mentioned in the product documentation.
Electrical installations
Work on electrical installations
Work on electrical installations may only be carried out by qualified electricians
DANGER!
or by instructed persons working under the guidance and supervision of a
qualified electrician, in accordance with the electroctechnical regulations.
Assembly, installation, commissioning and inspection work
If any tools or accessories such as ladders are required, safe and suitable
devices must be used.
The activation of fire control installations for test purposes must not cause
damage to the system or parts thereof.
Fire control installations must only be activated after the test has been
completed and the system has been definitely handed over to the customer.
Third party systems or devices must only be activated in the presence of the
responsible person.
Modifications to the system design and the products
Modifications to a system or to individual products may cause faults or
malfunctioning. Please request written approval from us and the relevant
authorities concerning in-tended system modifications and system extensions.
Modules and spare parts
Locally procured modules and spare parts must comply with the technical
specifica-tions laid down by the manufacturer. This compliance is always ensured
for original spare parts supplied by us.
007002_e_en_--.doc
11.2007