Advertisement
Quick Links
FDS181C Alarm Strobe and Horn
Product Manual
Overview
Characteristics
Application
Fig. 1 Connect to panel
FDS181C alarm strobe and horn is compact design with nice appearance. It
adopts high lightness flashtube and loud horn. By setting, it has three selections of
alarm tones. For two-wire installation, FDS181C can be easily installed.
–
Fulfill GB26851-2011 Chinese national standard (Indoor type)
Strobe flash up to 100000 times
–
Low power consumption
–
–
Plug-in design
–
Wall concealed installation
Three horn tone settings
–
Connect to NAC output on panel or output module to be activated
–
–
Indoor use only
Fig. 2 Connect to module
Building Technologies
Control Products and Systems
Advertisement
Related Manuals for Siemens FDS181C
Summary of Contents for Siemens FDS181C
- Page 1 FDS181C Alarm Strobe and Horn Product Manual Overview FDS181C alarm strobe and horn is compact design with nice appearance. It adopts high lightness flashtube and loud horn. By setting, it has three selections of alarm tones. For two-wire installation, FDS181C can be easily installed.
- Page 2 7. Insert the cover bottom to the base first and then push top until close tightly (see Fig. 7 & 8). It would not cause any damage if inversed connected as the FDS181C is inversed wired protection, but it will not work until the connection is correct.
- Page 3 Designation Weight FDS181C S54329-F11-A1 Alarm strobe and horn 0.260 kg Beijing Siemens Cerberus Electronics Limited © Data and design subject to change without notice. No.1,Fengzhidonglu, Xibeiwang, HaiDian District, Beijing, 100094, China Tel: +10 6476 8806 Fax: +10 6476 8899 Doc No.
Need help?
Do you have a question about the FDS181C and is the answer not in the manual?
Questions and answers