About This Document - Siemens FDM275 Mounting Manual

1 About this document

Building Technologies
Fire Safety
Overview
The radio manual call points FDM275 and FDM275(F) are intended for use in
areas of a house where a fire can be detected by people who can manually trigger
an alarm.
The radio manual call points FDM275 and FDM275(F) consist of a housing, a
switching unit, and a battery pack.
Goal and purpose
This document contains all the information required to install the radio manual call
points FDM275 and FDM275(F).
Prerequisites:
● The installation location of the radio manual call point has been established.
● Mounting should be performed by a specialist in compliance with safety
regulations.
You will find more information about the radio manual call points FDM275 and
FDM275(F) in document A6V10401120.
Applicable documents
Document ID Title
A6V10271323 Data sheet SWING Neural radio fire detector
FDCW241, FDOOT271, FDM273, FDM275, FDM275(F)
A6V10401120 Technical Manual Radio manual call point FDM275, FDM275(F)
A6V10227631 Planning Radio fire detection system SWING
Intended use
The radio manual call points FDM275 and FDM275(F) may only be used together
with a radio gateway FDCW241 in a fire detection system FS20/FS720.
FDM275 will now apply to both variants of the radio manual call point – FDM275
and FDM275(F).
About this document
1
5 | 18
A6V10401114_f_en_--
2018-11-19