Power Supply Replacement Procedure; Prepare The Device - Magtek ExpressCard 2000 Replacement Procedure

Instant issuance card personalization system power supply replacement procedure

Hide thumbs Also See for ExpressCard 2000:

Table of Contents

3 - Power Supply Replacement Procedure

Power Supply Replacement Procedure

3.1

Prepare the device for service by following these steps:

1) Offer the customer the opportunity to remove any proprietary or security-sensitive consumables from

the device, including card stock, image printer ribbons, indent cartridges, and tipper foils. Some

consumables contain negative imprints of cardholder data and must be handled securely.

2) Make sure the device is powered on and connected to the network.

3) Open the top access door.

4) Inspect the device for any items that do not belong inside the cover, and remove them (examples

include loose mechanical parts, cards, insect or animal leavings, or jewelry).

5) Power down the device.

6) Disconnect the device's power and network cables and any security hardware.

ExpressCard 2000| Instant Issuance Card Personalization System | Power Supply Replacement Procedure

Page 7

Table of Contents

Do you have a question about the ExpressCard 2000 and is the answer not in the manual?