Sanyo LCD-32E30A Instruction Manual page 9

CONNECTING LCD TV
This LCD TV uses normal inpul voltages of 100-240V
AC. ll will automatically select the conect input vollage
and is designed to work with single-phase power
systems. To reduce risk of elec{rical shock do not plug
unit into any other type of power system. Consult your
authorized dealer or service personnel if you are not
sure of the type of power being supplied.
Connect the LCD TV to all peripheral equipment before
turning it on.
A
"ounon
For safety reasons, unplug the AC power cord when
the LCD TV is not in use.
Cable required for connection:
. Aerial Cable (not supplied with the LCD
TV)
NOTE:
For all aerial problems, please mnsult your
local dealer.
AC POWER CORD
The AC outlet should be near to the unit
and must be easily accessible.
I