Sanyo LCD-32E30A Instruction Manual page 46

Hide thumbs Also See for LCD-32E30A:

M EN U OP E R A TIO N

The Dealer mode has 9 different functions:

VOLUME LOCK, TUNING LOCK, START MODE, OSD, RC, AC POWER MODE, MUSIC MODE SETUP, RESET,

ANd BAUD MTE.

This func'tion limits the maximum volume value in the range 010 32.

I Press and hold MENU button on side control and then press INFO

button on remote control, to display "Dealer Mode" menu.

! Press r v buttons to selec{ desired item.

J Press OK button to confirm the selection.

This func'tion limits the maximum value of the volume. The range is set from 0 to 32.

lf the funclion is set to "OFF', the volume won'l be limiled in range.

This funclion locks all channels to prevent user adding/removing TV or DTV channels.

lf lhe function is set to "OFF', customers can search/clear TV or DTV channels.

This function decides which display source will appear anerAC/DC Power-On.

Sources are as follow: "ATV, 'TV-o" - "TV-10', "DW', 'DTV-o" -"DTV-10', 'Video 1", "Video 2", 'Video 3", "HDMI

,'HDM I 2 " a nd " PC".

lf this function is sel to "OFF', the display will follow the last source on Power On/Off.

1 "

When this function is set to 'OFF", the OSD won't be displayed on screen by Remote/Keypad activation.

lf the funclion is set to'ON', the display will shown lhe OSD from Remote/Keypad aclivation.

This function can switch on/ofi the remote conhol.

When the function is set 1o "Normal', lhe command can be executed by Remote Control.

When the function is set to "Prohibit", the mmmand can't be executed by Remote Control, except with Dealer's

HotKey.