Sanyo LCD-32E30A Instruction Manual page 20

Hide thumbs Also See for LCD-32E30A:

BASIC OPERATION

Press the INFO button on the Remote Control to display LCD W.status

1280 x768 (60H2)

Adjust the volume by pressing VOL +/- buttons on the Remote Control / Side Controls.

The volume dialogue box will appear on lhe screen for a short time,

Press the VOL + button to increase volume, and the VOL - bulton to decrease volume.

This function is used to limit maximum brightness for energy saving.

Press ENERGY SAVE bufton on the Remote Control to set ihis function as 'OFF", "Energy Save 1", "Energy

Save 2", and'Energy Save 3".

Note:

. The "Light Sensor" and "Manual Backlight Setting" function are invalidated when the "Energy Save Mode"

function is'turned on.

Press STILL bufton on the Remote Control to switch the still function On/Off. The still function freezes the

main Dicture.

N o te :

. When the stillfunction is On, the picture will be frozen, but audio will continue.

. This function doesn'tworkwhen the input signal is 1080p.