Sanyo LCD-32E30A Instruction Manual page 19

Hide thumbs Also See for LCD-32E30A:

B A S I C O PE R A T I O N

Select input source by pressing "INPUT" button on Remote Control / Side Controls.

This LCD TV can display a number of source types.

For direct access to programs using the (0-9) number buttons:

1 ) For selection of channel positions from 0-9. e.g.: For channel position g, press the g button on the

Remote Control.

2) For selection of channel positions from 10-99. e.g.: For channel position 25, press the NUMBER buttons

to display channel, then press 2 and S buttons on Remote Control.

Press CH +/- buttons to select DTV/ATV channel

1 ) Press CH + button to select next channel.

2) Press CH - button to select previous channel.

Press PiaP button on the Remote Control to switch between current channel and previous channel.

For example, if you are watching channel 4, but you were watching channel 2 previously:

Press the P*P

button, Channel 2 will appear immediately.

1 ). "Stereo", 'Mono", "Dual 1 ", and "Dual 2".

2). "1 English ( PCM )", and "2 English (AC3 )'.

( O nl y f o r W )

( Onlyfor DW )

lf the input source doesn't have audio signal function, this bufton is invalid.

Press vA/B bufton on the Remote control to select the following audio signals sequentially:

t 9