Sanyo LCD-32E30A Instruction Manual page 28

MEN U OP E R A TIO N
I Press MENU button and the Main Menu will appear.
Press < > buttons 1o select "PICTURE", and display "PICTURE'
menu.
/ Press r v butlons to select desired item.
J Press OK button io confirm the selection.
. Press BACK button on the Remote Control to cancel OSD operations and return to normal screen.
. Press MENU button or wait about 60 seconds to exit menu operations.
Note:
. 'VGA Set'is only supported for PC input.
. "Film Mode" is supported for Vldeo 1 and 2 input (SD Signal).
. Backlight' cannot be adjusled except for PC input or when "Picture Mode' function is selected in the "Memory'
mode.
( Refer to "Picture Mode" below )
The functions "Auto Contrast Enhancement', "Picture Mode"
,'Contrast", "Brightness",'Colo/, "Sharpness", and "TINT' are
selected by pressing
V buttons.
Press < > buttons to adjust value or setting.
. Press BACK button to return to the previous menu.
. Press IIENU button or wait for about 60 seconds 1o exit menu
operation.
Note:
. The functions "Auto Contrast Enhancement', "Picture Mode', 'Saturation", and 'TINT' are not supported
for PC input.
. "TINT'cannot be adjusted except in NTSC / NTSC 4.43 system. (No-signal status, default in PAL system)
. The functions "Contrast", "Brightness", "Colol', "Sharpness", and "TlNT" are supported when "Memory"
mode is selected in "Picture Mode'.
This function calculates the display's Min/Max brightness to enhance contrast automatically.
Turn this function "On" or 'Off' by pressing < > buttons.
Select appropriate mode by pressing < > buttons.
'ffi*
,
'::r ,{
r;i?lp&Le1todeF3i1c,1rnr iii.
Dynamic
Bright and dynamic picture. Suitable for DVDS etc. when picture quality is good
Standard
Natural picture levels as in LCD TV.
Movie
Inhibits strong contrast and color; beneficial for eye comfort.
Memory User Dresets as set in 'Picture mode' function.
28