Sanyo LCD-32E30A Instruction Manual page 14

Hide thumbs Also See for LCD-32E30A:

BE FOR E OP E R A TI O N

I The screen at right will appear the first time the TV is switcheo on

and each time the TV is reset.

I The firsl step is to set up "Energy Save Mode".

J Press <or > button on Remote Control to select the 'standard/

Energy Save" or "Store/Dynamic" mode in "Energy Save Mode"

menu.

{ eress 'OK" button to set "Energy Save Mode" and start ATV/DTV

Scan.

The Auto Scan screen will appear and the TV will automatically

start to search for available stations. The progress bar will pan

accordingly.

J Wnen DTV search is completed, the TV will automatically tum to

the lowest logical channel number.

Notes:

. To ensure your lelevision is operating at optimal energy efiiciency,

select "Standard/Energy Save" mode during initial activation.

"Standard/Energy Save" mode is recommended for normal home

use.

. Energy Saving Mode: The factory default setling of this television

meets ENERGY SAVING requirements. Changing picture settings

may increase energy consumption, possibly beyond the limits

required for the ENERGY SAVING qualitication.

NO SIGNAL SHUT OFF

This LCD ry set incorporates a "NO SIGNAL SHUT OFF" function.

lf there is no signal input, a "No Signal" message will display for about

15 minutes and the LCD TV will automatically power off.

Energy Save Mode

ATV Auto Scan

DTV Auto Scan