Sanyo LCD-32E30A Instruction Manual page 42

Hide thumbs Also See for LCD-32E30A:

MEN U OP E R A TIO N

The functions "No Operation Off', and "No Signal Off, are selected by

pressing A V buttons.

Press < > buttons to adiust lhe settinq.

ffiffiffi$

This function tums ofi the power, after a set period of time, when the user does not operate the system.

The period of time before "No Operation Off can be set by the user.

" No Op e r a tion Off'se tting sa re 'Disa b le', '1

H our" , "1. 5H ours " , " 2H ou r s ", " 2. 5 H o ur s " , " 3H ou r s " , " 4H o ur s ',

"5 Hours", and "6 Hours'.

Note:

. The default setting of this function is 'Disable'.

#,#ffi

This function tums off the powe( after a set period of time when there is no source signal input.

The period of time before "No Slgnal Off' can be set by the user.

'No Signal Off settings are "Disable', "5 Minutes", "10 Minutes", "15 Minutes', "20 Minutes", "30 Minutes",

a n d '4 5 M in ute s' .

Note:

. The defaun setting of this function is "Disable".

The function "Banner Duration" is selected direclly from the menu.

Press < > buttons to adjust duration value.

This function controls the length of time a message is displayed if user does not press any key

The "Banner Duration" can be decided by the user.

Lenght of "Banner Duration" settings are' 1 -12 Seconds".

Note:

. The default setting of the function is 3 seconds.