Sanyo LCD-32E30A Instruction Manual page 30

Hide thumbs Also See for LCD-32E30A:

M EN U O PE R AT IO N

From the function 'Aspect Ratio' select the desired setting.

Select from "Wide', "Super Live 2', "Cinema 2", "4 : 3", "Super Live

1 ', ' Cin e ma 1' , "S ub litle ", "1 4:9 ", and " A uto" by pressi n g <>

buttons.

Note:

. 'Auto'is only supported for HDMI input.

"Energy Save Mode", "Light Sensoi', and "Backlight Setting'

functions are selected by pressing

v buttons.

Press < > buttons lo adjust values/settings.

Note:

. "Backlight' cannot be adjusted except for PC input or when 'Memory' mode is selected in "Picture Mode"

(Refer to "Picture Mode" above )

Example: lf'Light Senso/'function is lurned 1o "ON", the 'Energy Save Mode', and "Backlight Setting" can't be

adjusted. (Olher functions are set to "OFF .)

This function is used to set maximum brightness to limit power consumption of the LCD TV.

Select'Off,'Energy Save Mode 1", "Energy Save Mode 2', and "Energy Save Mode 3'by pressing<>

buttons,

This function automatically adjusts the backlight of the LCD TV arcording to ambient levels.

When surroundings are dark, the LCD W will automatically adjust the backlight to MlN.

\ /hen surroundings are bright, the LCD TV will automatically adjust the backlight to MAX.

Select "Off, 'On", and 'On: Display' by pressing < > buttons.

'" 9fE,

Eneruy"$Aveilode

{ Enerbtr s*eji{odtldl-€nergt sav" l!q@ s

Yo of Maximum

Briohtness

1 00

6 0