FLASHFORGE 3D PRINTER Inventor II S User Manual page 63

7-11
7.2.3 Pr int fr om USB Stick
①Insert your USB stick with target .g or .gx file to your InventorⅡS.
Turn on the Inventor Ⅱ S. Make sure the build plate has been leveled and the
②
filament is loaded.
[Pr int] and then tap the USB icon in the middle. The file(s) will be displayed
③Tap
on the screen. Select the file you want to print and tap [Pr int]. The file will be
transferred to the printer.
And the printer will heat up the nozzle automatically and start to print after the
⑥
nozzle reaches the aimed temperature.,
Abor t： To stop heating and printing. Once you tap [Abor t], the process is irreversible.
Pause：To suspend the print job, you can tap it again to resume it. You can use this
function when you want to change the filament halfway.
63
InventorIIS User Guide | www.flashforge.com