FLASHFORGE 3D PRINTER Inventor II S User Manual page 14

To set extruder temperature during printing:
After extruder temperature has reached
target temperature, temperature figure will
be underlined in print interface,
Tap the temperature figure to adjust;
Tap [Yes] to save the setting while tap [No]
to cancel the setting.
180—240℃
Temperature adjust range:
More in print interface
Printing speed: To change printing speed
during printing by tapping the underlined
speed figure.
Light bulb: To turn on/off the light.
Filament: To change filament during
printing. (Note: You need to suspend the
printing operation first)
 Finish-Shutdown: To start auto shutdown
after print job finished.
 Cancel: To end the tool orders and return
to the print interface.
To set the printing speed during printing
Tap the speed figure to adjust;
Tap [Yes] to save the setting while tap [No]
to cancel the setting.
—300%
Printing speed adjust range: 50%
Pr eheat
14
InventorIIS User Guide | www.flashforge.com