Assembly Instructions - Uplift Desk 2-Leg Side Table Directions For Assembly And Use

Please count all pieces before disposing of any carton or packing material. Use a padded or carpeted
area for assembly to avoid damage. For ease and safety, we recommend two people for assembly.
8
1
2

4. ASSEMBLY INSTRUCTIONS

A. Fully separate the Crossbar ends (part 3) you will find the Crossbar rails (parts 4) inside.
3
B.
Position the Crossbar ends (part 3) on their sides. You will be inserting
the Legs (part 1) into the Crossbar ends from below. When positioned correctly,
the mount tabs will be facing up (fig. 1).
Now, place the Legs (part 1) into the Crossbar ends from the
bottom (fig. 2). Using the supplied Allen wrench, insert four
(4) M6x14 Machine screws (part 12) into the Crossbar ends,
and rotate each screw only a few turns. Do not tighten fully
until step D.
If you drop a screw inside the Crossbar end, simply tilt
to retrieve the screw.
© UPLIFT Desk • 1-800-349-3839 • info@upliftdesk.com • www.upliftdesk.com
Configuration
6
8
8
5
8
7
8
8
9
8
Part Description
Leg
1
Foot
2
Crossbar end
3
Crossbar rail
4
Side bracket
5
Adhesive pads
6
Leveling studs
7
M6x14 Machine screw
8
M6x10 Machine screw
9
#10x5/8'' Wood screw
10 a
#10-24x5/8'' Machine screw
10 b
4
fig. 2
12
8
(pre-installed in feet)
(not pictured)
(not pictured)
3
fig. 1
Qty
2
2
2
2
2
10
4
24
8
12
8
12
3