Uplift Desk CHR455 Instructions

Pursuit ergonomic chair

Table of Contents

Download this manual

figure 1

Package Contents

Casters

(qty 5)

Insert the casters into each end of the base, then insert the cylinder into the base.

Lower the seat onto the cylinder.

Sit in the chair, and flip the lever on the left side to the "up" position (figure 1).

Lean back until you feel it click.

This unlocks the tilt to allow the seat to be upright.

There's a compartment under the seat, which could store these instructions

or other small items.

Pursuit™ Ergonomic Chair

CHR455

Base

Cylinder

Seat

CHR455/R03

Table of Contents

Do you have a question about the CHR455 and is the answer not in the manual?

Page 1 Lean back until you feel it click. This unlocks the tilt to allow the seat to be upright. Step 4 There’s a compartment under the seat, which could store these instructions or other small items. © UPLIFT Desk • 1-800-349-3839 • info@upliftdesk.com • www.upliftdesk.com CHR455/R03...
Page 2 Copyright Notice: These instructions are a component of the UPLIFT Pursuit™ Ergonomic Chair. These instructions are part of the scope of delivery, even if the item is resold. These instructions are also available on the UPLIFT Desk website: upliftdesk.com. Excerpts or copies may not be forwarded to third parties or used in any other ©...