Table of Contents
Advertisement
3-12
C
3: S
U
M
HAPTER
ETTING
P FOR
ANAGEMENT
Work Group ID
The workgroup number for purposes of manage-
ment. Management is only part of a single work-
group and should be viewed as a sub-net. If you
move your management setup to a new or different
subnet, you will need to change the workgroup ID.
Device IP Address
You must assign a unique address to the device in this
field. You change the IP address using this field.
Device SubNet Mask
You must assign a suitable network mask to the
device in this field. For a class B address, 255.255.0.0
is suitable. You change the Device SubNet Mask using
this field.
Default Router
Enter the IP address of the router with which the
Switch 2000 TR communicates. You can change the
Default Router IP address using this field.
NOTE:
The above IP address parameters and Work
Group ID will not be valid unless the Switch 2000 TR
is reset.
SETUP TRAPS
Select this button to display the setup screen for
SNMP trap parameters. Refer to Chapter 4.
SERIAL PORT
Select this button to display the setup screen for serial
port parameters. Refer to Chapter 4.
Advertisement
Table of Contents
