Setting Up The Lcd Console; Ip Address Setup - 3Com TR User Manual

Setting Up the LCD Console

This section provides instructions for setting up the
LCD console for local or remote management.
Press the [Enter] button on the front panel LCD to
1
enter the main menu.
Switch 2000 TR
Switch 2000 TR
Unit Id. 1
Unit Id: 1
ENTER
Figure 3-11 Front Panel LCD Main Banner
Press [Down Arrow] until the Switch 2000 TR >Man-
2
agement screen appears.
Press [Enter] to enter the management menu and
3
select the desired management type.
At this point you can choose IP.
If you choose IP, you need to assign an IP address,
subnet mask and default router in order to com-
municate with the Switch 2000 TR. Refer to "IP
Address Setup" on.

IP Address Setup

From the Management>IP Mgmt screen, proceed
as follows:
Press [Enter] to select IP address field.
1
The IP Mgmt >IP Address screen appears.
Press [Enter].
2
Setting Up the LCD Console
A blank decimal notation appears on the IP Address.
Enter IP address as follows:
3
Select the value of the digit by moving the
[Up or Down Arrow] until the desired value
appears. Choose from 0 through 9 and ".".
Select the next digit by moving the [Right
Arrow].
NOTE: Be sure to use standard dotted decimal nota-
tion for the IP address.
Press [Enter] to accept the address.
4
If the address is valid, you return to the previous
menu by pressing [Enter]. If the address is invalid an
error message displays and returns you to the previ-
ous menu when you press [Enter].
Press [Down Arrow].
5
The IP Mgmt >Subnet Mask screen appears.
Press [Enter].
6
A blank decimal notation appears in the Subnet Mask
field.
Enter the Subnet Mask address as follows:
7
Select the value of the digit by moving the
[Up or Down Arrow] until the desired value
appears. Choose from 0 through 9 and ".".
Select the first digit by moving the [Right Arrow].
Press [Enter] to accept the address.
8
Press [Down Arrow].
9
The IP Mgmt >Default Router screen appears.
3-15