Labconco Protector Echo 180 Series User Manual page 43

Chapter 3: Getting Started
Audible alarm Mgmt.
"Fan set point"
Arrow down to
You should now see:
>Default (2850)
Minimal (1500)
Reference your GFH Settings Sheet, arrow down to "Default" press "OK" to
select it. Enter value from GFH Settings Sheet.
"Confirm new value"
"Minimal"
Arrow down to
Enter value from GFH Settings Sheet.
"Confirm new value"
"X"
Press to return to the previous menu.
Step 11 – Set alarm delays and choose the sash t ype.
Reference your GFH Settings sheet for the following step:
You should see:
>Hood integration
Fan set point
Semicon S. Alarm Delay
Electro S. Alarm Delay
Sash sensor trigger
Software releases
Audible alarm Mgmt.
"Semicon S. alarm Delay"
Arrow down to
You will see:
05 Minutes
1 Min
60 Max
Make the 0 a 1 for 15 Minutes
"Ok" "Confirm new value"
Press then
You should see this menu again:
>Hood integration
Fan set point
Semicon S. Alarm Delay
Electro S. Alarm Delay
Sash sensor trigger
Software releases
Audible alarm Mgmt.
"Electro S. alarm Delay"
Arrow down to
38
"Ok"
press to select it.
"Ok"
press to confirm.
"Ok"
press to select it.
"Ok"
press to confirm.
press
press
press
"Ok"
to select it.
"Ok"
to confirm.
"Ok"
to select it.
Product Service 1-800-522-7658
Original instructions