Integrated Peripherals - SOLTEK SL–55F5 Notice To End Users

Integrated Peripherals

Integrated Peripherals option changes the values of the chipset registers.
These registers control system options in the computer.
1. Choose "INTEGRATED PERIPHERALS" from the Main Menu and a
screen with a list of options will appear.
Onchip IDE Channe10
Onchip IDE Channe11
IDE Prefetch Mode
IDE HDD Block Mode
Primary Master PIO
Secondary Master PIO
Secondary Slave PIO
Primary Master UDMA
Primary Slave UDMA
Secondary Master UDMA
Secondary Slave UDMA
Onboard FDC Controller
Onboard Serial Port 1
Onboard Serial Port 2
2F8/IRQ3
UART 2 Mode
IR Function Duplex
TX,RX, inverting enable
Onboard Parallel Port
2. Use one of the arrow keys to move between options and modify the
selected options by using PgUp/PgDn/+/– keys.
A short description of screen options is as follows:
On-Chip IDE
Channel 0/1
IDE Prefetch Mod
IDE HDD Block
disk
Mode
ROM PCI/ISA BIOS
INTEGRATED PERIPHERALS
AWARD SOFTWARE, INC.
: Enabled
: Enabled
: Enabled
: Enabled
: Auto
: Auto
: Auto
: Auto
: Auto
: Auto
: Auto
: Enabled
: 3F8/IRQ4
:
: HPSIR
: Half
: No,No
: 378/IRQ7
Enabled (default): Turn on the onboard IDE function.
Disabled: Turn off the onboard IDE function.
The onboard IDE drive interfaces supports IDE
prefetching, for faster drive accesses. If you install a
primary and/or secondary add-in IDE interface, set
this field to Disabled if the interface does not support
prefetching. The choice: Enabled, Disabled.
Choose Enabled (default) or Disabled. If your hard
size is larger than 540MB, choose Enabled, and, if
you are using the IDE HDD Auto Detection option, the
BIOS will choose this option automatically.
39
Onboard Parallel Mode
ECP Mode Use DMA
Parallel Port EPP Type : EPP1.7
Onboard Legacy Audio
Sound Blaster
SB I/O Base Address
SB IRQ Select
SB DMA Select
MPU-401
MPU-401 I/O Address
FM Port (388-38BH)
Game Port (200-207H)
↑↓→ ←: Select Item
ESC : Quit
F1 : Help
F5 : Old Values (Shift)F2: Color
F6 : Load BIOS Defaults
F7 : Load Setup Defaults
: ECP/EPP
: 3
: Enabled
: Enabled
: 220H
: IRQ 5
: DMA 1
: Disabled
: 330-333H
: Disabled
: Enabled
PU/PD/+/- : Modify