J1 Switch Signal Summary - SOLTEK SL–55F5 Notice To End Users

J1 Switch Signal Summary

HDD LED Connector
N.C.
Infrared Connector
N.C.
PWR
SLEEP
J1 pin1 ~ pin4: IDE LED Activity Light
This connector connects to the hard disk activity indicator light on the case.
J1 pin6 ~ pin10: Infrared Port Module Connector
The system board provides a 5-pin infrared connector-R1 for an optional
wireless transmitting and receiving module. Pin 6 through pin 10 are Transmit,
GND, Receive (low speed), Receive (high speed), and Vcc, Respectively.
J1 pin12, pin13: ATX Power Switch
Toggle this pin for turning on/off the ATX Power Supply.
J1 pin14, pin15: Sleep Switch
Toggle this jumper force the system to sleep and the system won't wake up
until the hardware event is coming. (the BIOS Power Management setting
must be Enabled.)
J1 Pin Signal Description
1 +5V
2 HDD LED Signal
3 HDD LED Signal
4 +5V
5 No Connection
6 Infrared Transmit Signal
7 GND
Infrared Receive Signal
8
(low speed)
Infrared Receive Signal
9
(high speed)
10 +5V
11 No Connection
12 5V Standby
13 Power Switch
SMI Signal
14
GND
15
19