J2 Switch Signal Summary - SOLTEK SL–55F5 Notice To End Users

J2 Switch Signal Summary

Speaker Connector
Reset Switch
N.C.
Power LED Connector
N.C.
N.C.
Turbo LED Connector
J2 pin1 ~ pin4: Speaker Connector
The speaker connector is a 4-pin connector for connecting the system and the
speaker.
J2 pin5, pin6: Reset Switch
The system board has a 2-pin connector for rebooting your computer without
having to turn off your power switch. This prolongs the life of the system's
power supply.
J2 pin8 ~ pin10: Power LED
See the following drawing for jumper position, and pin8 ~ pin10 is connected
to power LED.
J2 pin14 ~ pin15: Turbo LED
J2 Pin Signal Description
1 Speaker Signal
2 No Connection
3 Ground
4 +5V
5 Reset Signal
6 Ground
7 No Connection
8 +5V
9 No Connection
10 Ground
11 No Connection
12 No Connection
13 No Connection
14 Turbo LED Connector
15 Ground
20