Table of Contents
Advertisement
Embroidery preparation
> When inserting into the machine, hold the bobbin case so the thread guide (5) points upwards.
5
> Insert the bobbin case.
> Press onto the center of the bobbin case until it engages.
> Pull the thread through the thread cutter (6) and cut.
6
> Close the bobbin cover.
Thread-up command
The machine must be ready for embroidery to bring up the bobbin thread. The bobbin thread can be
brought up in one step for a manual knotting. If no securing stitches are wanted, it is recommended to
deactivate the securing stitches in the Setup.
> Hold the upper thread.
> Press the button «Needle up/down».
–
The bobbin thread is brought up automatically.
Indicating fill level of bobbin thread
As soon as the fill level of the bobbin thread is low, an animation, which indicates that the bobbin thread is
running out, appears in the icon «Bobbin thread fill level».
> Touch the icon «Bobbin thread fill level» to thread the bobbin thread according to the animation.
43
Advertisement
Table of Contents
