Menu operations
7. Press OK.
The handset sends an absence reason code to the system by establishing a call. The call is
automatically disconnected after a few seconds.
Deactivating the Absence settings
Procedure
1. Press Menu.
2. Select Calls.
3. Select Call services > Absence.
4. Select Deactivate.
5. Press Select.
Diverting calls
About this task
You can divert internal calls, external calls, calls when busy, and calls on no reply to another phone
number.
Procedure
1. Press Menu.
2. Select Calls.
3. Select Call services > Divert calls.
You can create a shortcut to the Call services function or activate a call service when a
profile is activated.
You can set the PBX settings for the call diversion to show the Divert calls menu in the
handset.
4. Select Activate.
5. Select any of the following:
• Internal or External: Diverts internal or external calls.
• No reply: Diverts calls on no reply.
• When busy: Diverts calls when the handset sends a busy tone or is on another call.
6. Enter the number (maximum 24 digits) to which you want to divert the calls. Alternatively,
press the Call Contact list (
7. Press OK.
The handset sends a diversion reason code to the system by establishing a call. The call is
automatically disconnected after a few seconds.
The code is defined while configuring the diversion reason in the handset.
July 2017
Using Avaya 374x DECT handsets connected to Avaya Aura
) to see the call contact list.
Manager and IP Office
Comments on this document? infodev@avaya.com
™
Communication
64