Avaya 374 DECT Series Manual page 57

3. Press Select.
The person initiating the conference call is the conference leader, and the others are
participant members of the conference call.
Sending call waiting
About this task
Use this procedure to notify the engaged party that another call is trying to reach them.
During a call, a second call appears and then a short tone is heard.
Procedure
1. Press More.
2. Select Call waiting.
3. Press Select.
You are connected with the new caller. The other call is put on hold.
When the line is free it will automatically call the call put on hold again. This function is
system dependent.
Note:
You can also accept the second call by pressing the Off-Hook key.
Answering call waiting
About this task
Use this procedure to answer call waiting when you:
• Receive a short tone for another incoming call during an ongoing conversation.
• Receive a beep from the handset and a text display: Internal call for internal callers and
External call for external callers. The handset also displays the name or the phone number of
the second caller.
Note:
You can use Answer call waiting function in two different ways depending on the system setup
and configuration.
Procedure
During a call, you receive a short tone. To answer the second call, do the following:
1. Press More.
2. Select Answer call waiting.
3. Press Select.
You connect to the new call and the first call is put on hold. When the line is free, the call on
hold is automatically dialled again. This is a system dependent feature.
During a call, you receive a beep and a text display. To answer the second call, do the following:
July 2017 Using Avaya 374x DECT handsets connected to Avaya Aura
Manager and IP Office
Comments on this document? infodev@avaya.com
™ Communication
Calls
57