4. Put the headset in pairing mode and press OK.
The handset starts searching for the headset.
5. The headset is displayed in the handset menu Headset found. Press Select to select the
headset.
The pairing starts.
6. A PIN-code is requested for the Bluetooth headset. Enter the PIN-code and press Select.
The system displays the message Pairing successful.
7. The paired headset is displayed in the handset menu Headset. When pairing a new headset
it is automatically connected and will be used for calls.
Adding another Bluetooth headset
You can configure up to four headsets to the handset, but you can select only one at a time. To pair
another headset repeat section Pair and Connect a headset steps 1-6.
The paired headsets are displayed by a default name in the handset menu as Headset. Confirm
with Select.
Selecting a Bluetooth headset
Procedure
1. Press Menu.
2. Select Connections.
3. Select Bluetooth > Headset.
4. Select a headset by pressing up or down on the navigation key.
5. Press Select.
The system displays the message: Connection successful is displayed.
The headset is selected.
When a new headset has been selected any previous headset automatically gets
disconnected.
July 2017
Using Avaya 374x DECT handsets connected to Avaya Aura
Manager and IP Office
Comments on this document? infodev@avaya.com
Adding another Bluetooth headset
™
Communication
121