Avaya 374 DECT Series Manual page 58

Menu operations
4. Press Accept.
The system displays the text Switch briefly and transfers to the second call. The first call is
put on hold.
5. To end the call with the second caller, press More > End call.
You disconnect with the second call and connect with the first call.
6. (Optional) Press Decline to reject a second call.
The second caller hears a busy tone, and the call is logged as a missed call in the handset.
Enabling DTMF
About this task
Some systems or PBXs require that the handset sends Dual Tone Multi Frequency (DTMF) when
pressing the keys. Use this procedure to enable the DTMF.
Note:
DECT info: This submenu is only visible if the Admin menu is activated.
Before you begin
You must be on a call.
Procedure
Do the following:
• Press More > DTMF > Select.
Using the loudspeaker
About this task
Use the procedure to activate the loudspeaking function.
Procedure
Do one of the following:
•
When receiving a call, press the soft key
•
During a call, press the soft key
• During a call, put the handset in a charger. Requires that the parameter Call behavior is set to
Put on Loudspeaker in PDM or Device Manager.
• This function can also be activated by selecting another answering method, that is,
Automatically and or Loudspeaking.
July 2017 Using Avaya 374x DECT handsets connected to Avaya Aura
.
.
Manager and IP Office
Comments on this document? infodev@avaya.com
™ Communication
58