Martin Universal Design Michaels Creative Table 10165131 Assembly Instructions Manual page 9

Creative Table Stool Assembly Instructions:
BB
FF
CC
EE
EE
FF
Begin by taking Part AA & BB,
position them as shown above.
Insert part CC between AA &
BB.
Secure by inserting the [4]
6x25mm bolts (part EE) through
the inside back through to the
outside and thread into Part FF.
Tighten to secure.
If you have difficulty assembling your Creative Table Stool or need customer service assistance.
Please call: Martin Universal Design, Inc. Customer Service Hot Line at 1-313-895-0700.
If you need additional parts, it is not necessary to contact your dealer,
AA
FF
EE
FF
DD
Attach Stool seat to stool
assembly by laying the seat
onto the floor and place the
stool assembly over it. Secure
with [4] 6x32mm bolts
(part GG).
Tighten down to secure.
our Customer Service Rep. will forward them to you immediately.
Martin Universal Design, Inc. • Detroit, MI 48208 USA
Tel: 1-313-895-0700 • E-mail: custservMUD@gmail.com • www.MartinUniversalDesign.com
GG GG
GG
IMPORTANT
9
Double check that all bolts are
tightened. Once that is complete
Turn your stool over onto its legs
and use.
02/28/11 rev. - RPI